Nicomatic CMM Series 100 Signal

NICOMATIC CMM SERIES 100 SIGNAL LF

The NICOMATIC CMM 100 (Low Frequency) interconnect system is a 2mm pitch connector with 1 row of signal contacts, from 2 to 25 ways, fixing by latch, with proven high reliability under the most extreme environmental conditions. The CMM range was designed for use in aerospace, instrumentation and control, military and transportation sectors with applications to date including IFES, HUD, flight controls, FADEC units, radar, missiles, optoelectronic sighting systems, space satellites, mobile radios, power supplies, UAVs and engine controls.

Description

Description

NICOMATIC CMM SERIES 100 SIGNAL LF

The NICOMATIC CMM 100 (Low Frequency) interconnect system is a 2mm pitch connector with 1 row of signal contacts, from 2 to 25 ways, fixing by latch, with proven high reliability under the most extreme environmental conditions. The Nicomatic CMM range was designed for use in aerospace, instrumentation and control, military and transportation sectors with applications to date including IFES, HUD, flight controls, FADEC units, radar, missiles, optoelectronic sighting systems, space satellites, mobile radios, power supplies, UAVs and engine controls.

Key Features

Key Features

  • Board to board, board-to-wire and wire-to-wire connections
  • High density ­ saves up to 50% space and weight over conventional connectors or Sub-D
  • Mixed layout, LF, HF and HP in one footprint
  • 2 to 25 low frequency contacts, up to 2500 mating cycles
  • High reliability contact design for harsh environment usage
  • MIL-DTL-55302F and BS-9525-F0033 compliant
  • Resistant to solvents, radiation + oxygen free
  • RoHS and Reach compliant with tin whiskers free, gold plated contacts
  • 260ºC insulator allows infrared, wave or vapour phase
  • Secure latched or jackscrew locking for anti-vibration interconnection
  • Interchangeable and drop-in replacements for ITW McMurdo Micronector 200 single row and Harwin Datamate L-Tek Series. These ranges are comparable in fit, form and function.
Specifications

Specifications

Materials

  • Insulator: Special PPS (Polyphenylene Sulfide Fiberglass filled thermoplastic) UL94-V0
    Radiation resistant, no humidity absorption, oxygen free
    Note: PPS characteristics are recognised for space applications
  • P.C. or Crimp Low Frequency Contacts:
  • Male: Tail: copper alloy/Ni + Au flash 0.1µ Contact area: copper alloy/Ni + Au > 1µ
    Crimp Male body: copper alloy/Ni + Au > 1µ
  • Female:
    Body: copper alloy/Ni + Au 0.2µ Socket: beryllium copper/Ni + Au flash > 1.25µ
  • Fixing Hardware:
    Jackscrew: stainless steel
    Latch: beryllium copper/plated nickel (CMM100/200 series only)

Electrical

  • All contacts: 3A Max @ 25ºC / 2.2 A Max @ 85ºC
  • Working voltage (sea level): tested at 800 V DC
  • Proof voltage: tested at 1,200 V DC
  • Contact resistance: (initially) max.10 mΩ
  • Insulation resistance: 1 000 MΩ min

Environmental

  • Operating Temperature: -60ºC to + 260ºC Reflow solder process compatible
  • Vibration Severity: 0.75mm, 10g RMS 6 hours long random with superimposed sinusoid. No intermittencies when using an HSLI detector with a trip threshold of 2ns. MIL DTL 55302F Test Condition III [147.1 m/s2 (15gn) peak].
  • Shock severity: 100g for 6 ms
  • Solvent resistance: HcFc 141 bMGX (ATOCHEM) solvent

Mechanical

  • Mechanical operations: Up to 2500 cycles
  • Contact insertion & withdrawal force: 2N Max/0.2N min. per contact
  • Contact retention in insulator: 10 N Min
  • Contact replacement in insulator: 3 cycles (crimp contacts only)
Applications

Applications

Nicomatic CMM micro-connectors are designed to meet or exceed the relevant electrical and environmental performances described in MIL-DTL-55302F and BS9525-F0033 standards so were designed for use in aerospace, instrumentation and control, military and transportation sectors with applications to date including IFES, HUD, flight controls, FADEC units, radar, missiles, optoelectronic sighting systems, space satellites, mobile radios, power supplies, UAVs and engine controls.

Nicomatic has developed back potting services and shapes as a fast, flexible and reliable solution for harness protection in the CMM Connector Series. These backpotting solutions provide protection from moisture or debris to the contacts while offer strain relief to the wire and cable as an effective alternative to overmolding or backshells. In2Connect recommend usage of Stycast 2651 MM with Catalyst 9 (8% – 10%) and can also offer harness assembly either pigtailed or complete.