D-sub hoods and connector accessories from In2Connect

Description
Key Features
Specifications
Applications
Downloads


	EMI/RFI shielded dsub hoods for braided or foil shielded cables. Accepts 4.0 – 12.5mm cable. Available in 9, 15, 25 & 37	Typical part number MDE6.5CK
	Die cast shielded d-sub hood. Accepts both foil and braided cables. Accepts 4.0 – 12.5mm cable. Available in 9, 15, 25 & 37	Typical part number MDZE9
	Jackscrew M Series plastic dsub hood. Available in 9, 15, 25 & 37 way with long or short jackscrews. Top or side cable entry. UL94-0	Typical part number MDM25L CAL25
	Slidelock M Series plastic dsub hood. Available in 9, 15, 25 & 37 way with slide lock. Top or side cable entry. Latches extra = ML1	Typical part number MDM9SL
	P Series snap fit, low cost quick assembly cover. Internal tie-wraps/external cable clamp. Top or side entry in 9, 15 and 25 way.	Typical part number MDEP 51009-5(DSFC09)
	McMurdo slidelock N series cover. 4 point locking, top or side entry. 9, 15, 25, 37 & 50 way. ML1 latches required on mating half	Typical part number MDN9SL CEEP CE9
	Female Screwlock kit 4-40 UNC. Length of thread 7.9mm or 14.5mm. Tinned	MD20418-2T TB125 MD20418-2LT TB195
	Simple, low cost MDN black plastic d-sub hood with male jack (finger) posts 4-40 UNC, top cable entry	Typical part number MDN9L, D09T
	Simple, low cost MDN black plastic d-sub hood with FEMALE jack (finger) posts 4-40 UNC, top cable entry	Typical part number D09TF
	D-sub plastic hood straight cable entry in 9-50 positions with long 4-40 UNC jackscrews. Large internal size similar to obsolete McMurdo MDL	Typical part number 165X03329A
	D-sub plastic hood straight cable entry in 9-50 positions with short side screws. Large internal size similar to obsolete McMurdo MDL	Typical part number 165X13389X
	IP67 water resistant hood for Standard and Combo D-SUBs, 9-50 ways. Large internal space for HP and coaxial contacts. J/screws	Typical part number 165X14839 X

MDM37L | D09TF | D09T | DSFC09 | MDEP51009-5 | MJS | MJL | MDM9L | MDM09L | MDM25L | MDN25SL | MDN9SL | MDN9SLM | MDZE9 | ML110 | ML1 10 | ML1-10

Key Features

Full range of plastic, metal and metallised plastic d-sub hoods
Low cost, high performance, shielded d connector hoods – both diecast and pressed steel
Snap-fit hoods for fast efficient assembly
Ethernet/Thinnernet shielded hoods
IP67 waterproof d-sub hoods and caps, boots, etc.
Complete range of screwlocks, slidelocks and jack posts for d sub connectors.

Specifications

Types

Screw Lock Assemblies
Sliding Lock Assemblies
EMI/RFI Shielded Hoods for Braided or Foil Shielded Cables
Metal Hoods With Plastic Covers (Braided Cable)
Metal Hoods With Plastic Covers (Foil Shielded Cable)
Screened Hoods for Ethernet & Thinnernet
Snap-lock Plastic Cover
IP67 waterproof d-sub hoods
Die Cast Shielded
Jackscrew Cover
Slidelock Cover
Plastic Junction Shells
Line-to-line mating d-sub hoods

Applications

Hoods and Accessories for D Sub-miniature Connectors

The wide range of applications that d-sub connectors get used in dictate the availability of a large selection of hoods – plastic, metallised plastic, diecast EMI/RFI, waterproof, etc. RoHS compliant and UL/CSA

We also offer a wide selection of ITW McMurdo, Conec and in-house hoods designed specifically to cater for the extra width and height required by power and coax type contacts in mixed combination connectors.

In addition we can supply the largest selection of connector accessories, caps, screwlocks, sliding latches, threaded inserts, etc

Downloads

Download Conec D Accessories Data Sheet

Download McMurdo D Accessories Data Sheet

In2Connect Full Metal Sub-D hoods

In2Connect Plastic Sub-D hoods

In2Connect Metallised Plastic D-Sub Hoods

Conec SnapLock D-Sub connector hoods