Waterproof D-Sub Connector IP67

Material

	Shell - Steel Tin plated (Plugs EMI/RFI dimpled)
	Insulator - Polyester GF, UL 94V-0
	Contacts Copper alloy, plated hard acid gold over nickel Class 3 = 50 cycles Class 2 = 200 cycles Class 1 = 500 cycles

Electrical

	Current Standard 5A HDD 3A
	Voltage Standard 125V HDD 60V.
	Test voltage 1000V
	Contact Resistance Before use - max 10m After use - R max 10m Insulation Resistance - > 5 G

Mechanical

Mating/unmating forces

No. of Contacts

Standard

HDD

<30N

<50N

<84N

<83N

<120N

<123N

<170N

<167N

<200N

Mechanical Operations

	50 cycles
	200 cycles
	500 cycles

Environmental

Working temperature : -25 to +125 degrees C

Degree of protection - IP67

6 =	Complete protection against contact with live or moving parts inside the enclosure. Protection against ingress of dust.
7 =	Protection against immersion in water. It shall not be possible for water to enter the enclosure under stated conditions of pressure and time.

Types

Plug and socket solder bucket
Plug and socket straight PC
Plug and socket 90º PC
High Density plug and socket solder bucket
High Density plug and socket straight PC
High Density plug and socket 90º PC

Filter plug solder bucket

Filter plug straight PC

Filter plug 90º PC

capacitance 180/370/830/1300pF

High Density filter plug straight PC
High Density filter plug 90º PC
Plug and socket solder bucket combination
Plug and socket straight PC combination
Plug and socket 90º PC combination
3W3, 5W5, 8W8, 2W2C, 3W3C
Plug and socket (without sealing frame) for harnesses
Plug and socket for front mounting
Hoods and accessories

Waterproof d-sub Connectors to IEC 529, IP67 Specifications

This d-sub product range is rated to IP67 and can be mated to standard D-SUB Standard and D-SUB High Density connectors.

Conec's UL and CSA Approved waterproof D-Sub miniature connector 'system' includes standard D configuration as well as High Density, mixed layout, and Filtered options, all of which can be used in applications where moisture, high humidity, water or dust could be a problem.

IP67 connectors must allow no ingress of dust with complete protection against contact.

They must also prevent ingress of water in harmful quantity when immersed in water under defined conditions of pressure and time (Protected against the effects of temporary immersion between 15cm and 1metre. Duration of test 30minutes).

D-sub socket and plug connectors are available with solder cup, straight or right angled PCB contacts. Designed with a one piece Solid Body zinc diecast housing to resist mechanical impacts during installation and operation and minimise possible leakage paths; these connectors comply to current solder requirements with RoHS compliant solder temperatures.

Because of the wide range of configurations available, these waterproof connectors are built to order.

CLICK HERE TO BUILD IP67 D-SUB CONNECTOR PART NUMBER

CLICK HERE TO BUILD IP67 COMBO D CONNECTOR PART NUMBER

With this water resistant d-sub system, the back-potted and 'O' ring mounted panel connectors always ensure full IP67 conformity whether mated or unmated and can be further protected by an end cap when unmated. The mating d-sub cable end connector can have a waterproof hood as shown in the colour picture above. This has a compression ring to stop the ingress of water via the cable entry point at the rear and a sealing skirt at the connector interface. The cable-end connection will not itself meet IP67 when unmated unless a waterproof cap is fitted. Once mated, then the total d-sub connexion interface, not just the panel mount dsub connector will conform to IP67. (Please note that if the hooded connector is to mate with a FRONT MOUNTED waterproof panel connector, a replacement sealing skirt for the hood ~ ordered separately ~ is required to achieve IP67). Unless the sealing skirts or other forms of IP67 protection are added around the interface of the two connectors, any moisture getting into the mating zone could track across the pins and cause shorting.

Download Waterproof d-sub Data Sheet

Features
	Zinc diecast solid frame with O-ring for front or rear sealing of d-sub connector to panel. This robust design performs better against mechanical impacts during installation and operation and has less possible leak paths, making it ideal for applications such as industrial machinery, medical equipment, test and measurement equipment and communications.
	D-sub connectors internally 'sealed' to prevent ingress around the contacts
	Front or rear panel mounting d-sub options
	D-sub cable-end versions for harnessing
	IP67 D-sub hells tinned or tinned and dimpled
	Mounting threads in 4-40 UNC or M3
	Machined precision contacts, plated classes 1, 2 or 3 for high reliability
	Available from 9 to 78 ways plus combination mixed layout and EMI/RFI filtered series
	All termination styles available
These connectors are also known as watertight d-sub connectors and hoods, water proof d sub connectors, water tight d-sub connectors, waterproof dsub connectors and hoods, environmentally sealed d-sub connectors. DIN 41652 and MIL-DTL-24308 D-Sub waterproof connectors are intermateable and interchangeable with standard non-filtered connectors from all quality connector manufacturers. FURTHER INFORMATION
	Need help choosing the right waterproof d-sub connector for your application?
	Require detailed specifications, prices and availability?

Just complete our Please Call Me! contact form, and we will be in contact as soon as possible with an answer.

General Download

ITW McMurdo D connectors

Conec D-sub Connectors

Products Overview - Use the links below to navigate to your chosen product

D-sub I/O Connectors	Circular Connectors	Cable & Harnessing	PCB & Backplane Connectors	Waterproof Connectors

Filtered D-sub Connectors Waterproof D-sub Connectors Combination D-sub Connectors Machined pin Standard D-sub Connectors Low Cost Stamped/Formed D-subs High Density D-sub Connectors Crimp Contact D-sub Connectors D-sub Connector Accessories Press Fit D-sub Press Fit D-sub dual port Rectangular Connectors McMurdo Red range DIN 43650 Nicomatic CMM 220 Nicomatic DMM Edac Series 516 Edac waterproof Series 570	MIL-C 26482 MIL-C 38999 MIL-C 5015/VG95234 Nylon threaded Connectors IP68 M12 connectors M12 Junction/Bus systems Push-pull IP67 screened WA22-IP67 WP20-IP55 RJ45-IP67 USB 2.0-IP67 USB 3.0 RJ45 Magnetic Jacks EN3 weathertight connector IP67 Dual LC Fibre connector Souriau UTS Hi seal Lemo M Series Micro	Harnessing Engineered Custom Cables & Wire Cable Shield Characteristics Properties of Wire Insulations Extreme Temperature Cables Cable Design Thermometer Cable Types & Temperatures Cable Design Checklist	DIN 41612 (EN 60603-2) / DIN 41617 McMurdo Red Range McMurdo HE801 PCB Edge Connector McMurdo 200/300 IDC Flat Ribbon Cable Connector Nicomatic CMM 220 Nicomatic DMM Nicomatic Micro-flex HM 2mm Connectors PC/104 PC/104 Plus 22mm ATCA Connectors MicroTCA Connectors RJ45/RJ11 Magnetic Jacks USB and Firewire connectors COM Express/CoreExpress	IP67 d-subs Nylon threaded circular connectors IP68 EN3 circular connectors Waterproof WA22 Waterproof WP20 Waterproof RJ45 Waterproof USB DIN 43650 Edac waterproof 570 M12 connectors IP67 Fibre connectors LC Lemo M Series circular Souriau UTS Hi seal Use to talk to us now call "in2connect"