Contacts - gold plated Screw termination ~ 4 (3 + PE) and Solder bucket termination 7 (6 + PE) Male or Female
Electrical
Current
WA22 : 3 + PE 16A (wire size 14AWG)
WA22 : 6 + PE 10A (wire size 18AWG)
Voltage
WA22 : 400V (screw type) 3 pole + PE
WA22 : 250V (solder type) 6 pole + PE
Contact Resistance
WA22 : 3 pole + PE 2m
WA22 : 6 pole + PE 5m
Insulation Resistance - 2,000 m
Mechanical
Mechanical operations - 500 Min
Cable O/D range = 7.0 - 10.0mm
Locking system - round thread DIN 405
Environmental
Working temperature : - 40 to 100C.
Flammability - UL 94 VO
Pollution degree = 3
Installation category = III
Types
WA22J4TE2 ~ 3 + PE screw type male cable
WA22J7TE1 ~ 6 + PE solder type male cable
WA22K4Z2 ~ 3 + PE screw type female receptacle
WA22K7Z1 ~ 6 + PE solder type female receptacle
WA22K4ZE2 ~ 3 + PE screw type female cable
WA22K7ZE1 ~ 6 + PE solder type female cable
WA22J4Z2 ~ 3 + PE screw type male receptacle
WA22J7Z1 ~ 6 + PE solder type male receptacle
WA22G1 ~ Protective cap for male cable/receptacle
WA22G2 ~ Protective cap for female cable/receptacle
IP67 WA22 Circular Connectors
This connector range provides low-cost, weathertight, round screw threaded interconnection for industrial applications.
The circular connectors of the WA22 series are designed to meet the high requirements of industrial applications under harsh environmental conditions. The range includes versions with screw, or solder terminations in a rugged design with integral cable retention, accepting cable diameters from 7 to 10mm and wire cross sections from 0.75mm to 2.5mm².
Using a combination of sealing washers, inserts; grommets and PG11 threaded compression nuts; the insulators and contact areas in these connectors are sealed against environmental elements. The seals are sited so that the integral backshell can be easily removed to allow accurate soldering or screwing of the cores of the incoming cable. Connector end caps are available to suit the panel mount version and IP67 integrity is achieved when male and female connectors are mated or when the IP67 end cap is fitted to the IP67 socket body.
The mechanical properties of the WA22 connectors allow temperatures of -40 to 100 degrees C. They are RoHS compliant, CE marked, small, lightweight and extremely cost-effective ~ without compromising the integrity of the interconnection.
The WA22 connectors are designed for at least 500 mating cycles and the cable entry can accommodate cable diameters from 7 to 10mm.
The receptacle connectors share the same mounting footprint as similar connectors from Amphenol-Tuchel (C16-1) and Binder (962/963).
These connectors will mate with or replace those and other similar industry standard connectors.
