M12 Junction / Bus systems
| Materials - Junction Boxes |
 |
Contact - CuSn6 |
|
Contact plating - Nickel-plated, gold-plated |
|
Contact carrier - PBT, UL 94 |
|
Housing - PBT, UL 94 |
|
Sealing - FPM |
|
Grouting - PU resin, UL94 | |
| Electrical |
|
Current rating - IEC 61076-2-101 |
|
Rated voltage - IEC 61076-2-101 |
|
Insulation resistance - IEC 60512-2 | |
| Mechanical |
|
Degree of protection - IEC 60529 |
|
Mating cycles - IEC 61076-2-101 |
|
|
| Environmental |
|
Temperature range - IEC 60664-1 |
|
Pollution degree - IEC 60664-1 | |
| Types |
|
|
Junction systems -
- Male connector M12x1 - 2x Female connector M12x1
- Male connector M12x1 - 2x Female connector M8x1
- Male connector M12x1 - 2x Female connector M12x1
Sensor - Actuator - Junction Box
- 4 way junction box with cable, I/O-ports 4-pos + Ground
- 8 way junction box with cable, I/O-ports 4-pos + Ground
- 4 way junction box, with M23x1- connector, I/O ports 4-pos + Ground
- 8 way junction box, with M23x1 connector, I/O ports 4-pos + Ground
- 4 way junction box with cable, I/O ports 3-pos
- 8 way junction box with cable, I/O ports 3-pos
- 4 way junction with cable, I/O ports 4 pos
- 8 way junction box with cable. I/O ports 4 pos
- 4 way junction box, with M12x1 - connector, I/O ports 3-pos
- 8 way junction box, with M16x0.75- connector, I/O ports 3-pos
|
|
Bus systems -
- Female connector, axial with 360- shielding
- Male connector, axial with 360- shielding
- Connecting cable with 360- shielding
Female connector, axial - Male connector, axial
- Male connector M12x1 - Female connector M12x1 - Male connector M12x1
- Female connector, axial, field-attachable, 360-shielding, with clamp connection
- Female connector, axial, field-attachable, 360- shielding, with screw termination
- Male connector, axial, field-attachable, 360- shielding, with clamp connection
- Male connector, axial, field-attachable, 360- shielding, with screw termination
- Female socket with wire, frontmounting, M16x1.5-thread
- Female socket with wire, frontmounting, PG9-thread
- Male socket with wire, frontmounting, M16x1.5-thread
- Male socket with wire, frontmounting, PG9-thread
- Female socket dip-solder, backmounting, M16x1.5-thread
- Female socket dip-solder, backmounting, PG9-thread
- Male socket dip-solder, backmounting, M16x1.5-thread
- Male socket dip-solder, backmounting, PG9-thread
- Female socket dip-solder, frontmounting, axial, with shroud, installation height 5.5mm
- Female socket dip-solder, frontmounting, axial, with shroud, installation height 10mm
- Male socket dip-solder, frontmounting, axial, with shroud, installation height 5.5mm
- Male socket dip-solder, frontmounting, axial, with shroud, installation height 10mm
- Female socket dip-solder, backmounting, axial, with shroud, installation height 5.5mm
- Female socket dip-solder, backmounting, axial, with shroud, installation height 10mm
- Male socket dip-solder, backmounting, axial, with shroud, installation height 5.5mm
- Male socket dip-solder, backmounting, axial, with shroud, installation height 10mm
- Female socket dip-solder, frontmounting, angled, with shroud
- Male socket dip-solder, frontmounting, angled, with shroud
- Female socket dip-solder, backmounting, angled, with shroud
- Male socket dip-solder, backmounting, angled, with shroud
- Connecting cable SUB-D Male connector, angled, 9-pos, with programming interface - Male connector/Female connector M12x1, axial, B-coding, 4-pos
- Connecting cable SUB-D Male connector angled, 9-pos, with programming interface - Male connector M12x1, axial, B-coding, 4-pos
- Connecting cable SUB-D male connector, angled, 9-pos, with programming interface - Female connector M12x1, axial, B-coding, 4-pos
- SUB-D male connector, 9-pos, angled, with programming interface and quick connection for flexible conductor
- SUB-D male connector, 9-pos, angled, with programming interface and quick connection for inflexible conductor
- SUB-D male connector, 9-pos, axial, with screw termination
- Male connector, axial with 360- shielding
- Connecting cable with 360- shielding
Male connector, axial - Male connector, axial
- Female socket with wire, frontmounting, M16x1.5-thread
- Female socket with wire, frontmounting, PG9-thread
- Female socket dip-solder, backmounting, M16x1.5-thread
- Female socket dip-solder, backmounting, PG9-thread
- Female socket frontmounting, axial, with shroud, installation height 5.5mm
- Female socket frontmounting, axial, with shroud, installation height 10mm
- Female socket frontmounting, angled, with shroud
- Female socket backmounting, axial, with shroud, installation height 5.5mm
Female socket backmounting, axial, with shroud, installation height 10mm
- Female socket backmounting, angled, with shroud
| | |
|
Junction systems
Y junction boxes from CONEC with 5 pin connectors enable you to lay two incoming signals together at one E/A socket. This means that you can double your connection options for one actuator/ sensor box.
You can connect up to 16 initiators using one M12x1 junction box with 8 E/A sockets. CONEC overmoulded components are also available for the output connection to the sensor. This provides a cost-effective and practical wiring system in the field for sensors and actuators with a cabling system that meets protection class IP67. Junction boxes are used anywhere sensor and actuator signals need to be extended quickly and easily for connection to their superordinate control systems. Individual signals are either connected directly to the superordinate system via a homerun cable or via a connection interface. Optional LED displays for signal and power reduce the effort required to track down errors.
Bus Systems
Bus technology has advanced in industrial automation. The connectors required for data transmission are very BUS-specific. To access the complex world of Bus technology, Conec offers connectors for Profibus DP and Industrial Ethernet.
Profibus is a manufacturer-dependent, open field bus system for a variety of applications in manufacturing, processing and building automation.
Industrial Ethernet is the general term for all applications that use the Ethernet standard to network devices used in industrial automation. In industrial applications, networks must operate without interruption under extreme conditions, e.g. electromagnetic interference, very high constant temperatures as well as high mechanical specifications. Industrial Ethernet closes the circle, as it were, and creates a complete infrastructure, which stretches from the office to the machinery or even to the sensor.
For both bus systems, CONEC offers special M12x1 connectors with corresponding coding which meets the guidelines of the PNO (Profibus User Organisation) and the IEC 61076-2-101 Ad. 1. The coding used for these products (B and D coding) prevent incorrect connections using standard M12x1 components.
|
Features
. |
|
Installation size - M12 X 1 |
|
No of poles - 3, 4, 5, 6, 8 and 12 |
|
Coding - (A-coding) and (S- A-coding shielded) |
|
LED display - 2L and 3L |
|
Cable characteristics:
A1-PVC, grey
A3-PVC, grey, UL
G2-TPU, black, shielded, UL
G3-PVC, grey, shielded, UL
J1-TPU, orange, irradiated, halogenfree, UL
K1-TPU, black, high flexible, halogenfree, UL) |
FURTHER INFORMATION |
|
Need help choosing the right M12 connector for your application? |
|
Require detailed specifications, prices and availability? |
|
|
| Just complete our Please Call Me! contact form, and we will be in contact as soon as possible with an answer. | |  |
