|
ITW McMurdo "Special" D-subminiature connectors are available in the five standard shell sizes: 9, 15, 25, 37 and 50 way. The dimensions of d-subminiature connectors are generally in accordance with DIN 41652 and MIL-C-24308; because of this they are compatible and interchangeable across manufacturers. The contact pitch (distance between pins) in these standard size connectors is 2.74mm with 2.54mm between rows in the right angled version; 2.84mm between rows in the straight PC, i.e. the European PCB board 'footprint'.
These d-sub connectors are available with solder bucket, straight PC or right angled PC terminations and can be fitted with a range of board locks, female jackposts, etc. as standard. The application will normally dictate the use of either precision screw machined or stamped and formed contacts as in these economic, commercial type connectors. Optional solderable board locks on 90 degree p.c. versions act as an effective retention and grounding feature, holding the d connector to the pcb prior to and during soldering.
McMurdo special D connectors are on Bills of Materials across the globe and will be found installed as effective in/out connectors in many of the World's best known computer, interfacing and telecom/communications brands or as cable-end dbp, db25, etc. in serial cable manufacture.
Part numbers like the SDEX09SNT connector, 9 way right angled socket with built-in board locks and female jack posts enable CEMs worldwide to save both installation time and cost of inventory. RoHS compliant and suitable for mass soldering techniques like wave or reflow, you'll never be far from a McMurdo special D!
Features
 |
Choice of three termination styles - solder bucket, straight p.c. and 90 degree p.c. |
|
Threaded inserts on 90 degree p.c. versions as standard - accept a wide range of mounting hardware. |
|
Tinned and dimpled shell options - for EMI/RFI shielding. |
|
Optional solderable boardlock features for 90 degree p.c. types - reduce installation time. |
Benefits |
max.
