 |
DIN 43650 / ISO 4400 (EN 175301-803) Solenoid Valve Connectors.
A range of conveniently packaged connectors for use with pneumatic and hydraulic valves in process control applications ~ used with pressure switches, level sensors, motors, limit switches, actuators.
|
|
Industry standard, 2 and 3 contact, panel and cable mounting, vibration proof, gasket-sealed screwlock connectors. In2Connect offer forms A, B and C, all of which provide protection to IP 65 per IEC 60529. When correctly assembled with the gaskets and
screws which complete the package, this ensures reliable performance when exposed to fluid jets and dust. They conform to DIN EN 175301-803 (formerly DIN 43650).
The three styles: Form A (27.5 x 27.5mm), Form B
(28.5 x 21mm), and Form C (15.5 x 15.5mm), have 18 mm,
11 mm, and 8 mm contact separations, respectively.
Form B is commonly referred to as a "micro" connector,
while Form C is often referred to as a "sub-micro." Their
black, grey or transparent body mouldings are suitable for
ambient temperatures from -40 to + 125ºC and the screw
type; snap-inserted, silver plated contacts are rated at
10 Amps max. Uniquely there is a double cable inlet grommet
for Form A enabling the same connector to be used for both
PG9 and PG11 cables.
Right angled connectors can be purchased factory moulded
to PVC or Polyurethane cables, these have solder connections.
1 and 2 metres lengths are standard, other lengths are available on request.
CLICK HERE FOR PART NUMBERING
DIN 43650 connectors are available with in-built electronic components in a host of protection circuit configurations; incorporating LED indicators, varistors, diodes for overvoltage protection, rectifiers etc.
HTP connectors may also be customised
according to customer specifications. Preferred options with electronic components (preferred options in red):
Black or Grey bodies standard circuits: D0, V0, Z2, F0, R0
Transparent bodies standard circuits: L0, DL, VL, TL, FL, RL
Standard LED Colour: Red
CLICK HERE FOR THE STANDARD CIRCUITS
Extension cables M8 & M12 to DIN 43650
CLICK HERE FOR RECTANGULAR OR CIRCULAR BASES
|
