| Electrical |
 |
Current
| Individual contact (in isolation) |
1.5A max. @ 85ºC Tamb |
| All contacts simultaneously |
3A max. @ 25ºC Tamb
1A max. @ 85ºC Tamb
0.3A max. @ 125ºC Tamb |
| High Power |
15A max. @ 85ºC Tamb
25A max. @ 25ºC Tamb
10A max. @ 85ºC Tamb |
| Coaxial |
0.5A max. @ 85ºC Tamb | |
|
Working voltage sea level (1013 mbar) 250Vdc or ac peak |
|
Proof voltage sea level (1013 mbar) 1000Vdc or ac peak
8500m (300 mbar) 250Vdc or ac peak |
|
Contact Resistance
(initially) 10m max.
High Power 1.5m max.
Coaxial inner 12m max. outer 6m max.
(after conditioning) 15m max.
High Power 3m max.
Coaxial inner 16m max. outer 8m max |
|
Insulation Resistance (initially) 5G min. at 500V
(after conditioning) 100M min. |
|
Frequency Range 0-500MHz. |
|
Impedance 50 nom. |
|
Reflection Co-efficient 0.13 max.
(preserved impedance 10-500MHz) | |
|
| Mechanical |
|
|
Operations 500 cycles |
|
Engaging/Separation Force (per contact pair)
1N max. 0.2N min.
High Power 5N max. 1N min.
Coaxial 10N max. 2N min |
|
Contact Retention in moulding 20N (wire wrap 30N) 50N |
|
Contact Holding Force 0.15N min.
High Power 0.4N min.
Coaxial inner 0.15N min.
Coaxial outer 0.3N min. |
|
Contact plating Available as NG (BS9525) or MG (MIL-C-55302). | |
|
| Environment |
|
|
Classification 55/125/56 |
|
Vibration severity
General ~ 10Hz to 2000Hz, 0.75mm/98m/s (10gn)
duration 6h.
Additional (BS9525 F0041) ~ 13.3Hz to 2000Hz random with superimposed sinusoids, duration 15 min. in each of 4 planes
No intermittancies measured when using an H.S.L.I. Detector with trip threshold of 2 ns. |
|
Bump severity 390m/s (40gn), 4000+/- 10 bumps |
|
Shock severity 981m/s (100gn) for 6ms |
|
Acceleration severity 490m/s (50gn). | |
|
| Mould Sizes |
|
| A wide choice of mould sizes are available: |
|
l.f. - 17, 29, 33, 41, 53, 65, 72, 84 and 96 |
|
mixed layout - 5+3, 5+6, 0+7, 17+3, 17+6, 29+3, 41+3, 41+6, 53+3 | |
| Termination Styles (low frequency) |
| Available for both male and female covering PCBs of 1.6, 2.4 and 3.2mm thickness there is a choice of straight and 90 degree p.c., solder for wire, crimp (22-26 AWG) and wire wrapping. High power contacts are available with solder bucket, straight and 90 degree p.c. |
| Guides |
| A comprehensive range of guides is provided. These provide four functions i.e. fixing, jacking, guiding and positioning/polarising |
| Cross References |
| Crosses are available to Hypertac, ATI and Amphenol Socapex series 127 connectors. |
|
