Non-RoHS DIN 41612 connectors |
28th May 2010 |
|
|
| Do you still require non-RoHS DIN 41612 connectors for defence,
avionics and other non-ROHS applications? In2Connect can build
these two part printed circuit board connectors which range up to 96
contacts in three rows on a 2.54mm grid.
Like their standard counterparts, these connectors conform to DIN
41612, EN 60603-2 and BS 9525 requirements. They are produced to
special order in the Standard Forms B and C, plus B/2, C/2 and M but
with the contact zone selectively gold plated and the contact tails
(termination zone) tin/lead plated at the factory (Tin 63%/Lead 37%). MOQs as low as 250 pieces.
|
|
|
|
|
|
|
|
|
