ept offer a range of male IEC 60603-2 (DIN 41612) connectors for reflow soldering
New from 'ept' and In2Connect are DIN 41612 (IEC 60603-2) Through-Hole Technology Reflow solder connectors that can save important time and associated PCB assembly costs.
Until now, the most cost-effective means of applying a right angled male 41612 connector was to "press-fit" the connector to the PCB after all the other board components had been placed and reflow soldered. A logical addition to the standard press-fit male connectors, these new 'ept' "paste in hole" DIN 41612 THTR (Through-Hole Technology Reflow) types, can be fitted as with all other SMT reflow solder components before processing ~ completely eliminating the "press-fit" step and double handling of the PCB. The connector is manufactured with a high-temp plastic body moulding able to withstand a +260° C lead free soldering process to fulfil the requirements of J-STD-020D (Moisture/Reflow Sensitivity Classification for Non Hermetic Solid State Surface Mount Devices).
This all means less time, fewer production steps, and lower overall costs.
Samples of type C (male) 103-40064TH are available, plus other pin arrangements like DIN 41612 types DIN B male; B/2 male; B female; C female and DIN R male connectors can be supplied in a THTR-version.
Samples of following p/n are available: 101-40064TH
101-90014TH
115-40065TH
302-40064-01TH
304-40064-01TH
Other pin loading, or connectors with boardlocks, etc. can be built at short notice.
Availability for volume shipments: low quantities at short notice; higher quantities on request.
Please get in touch with us.
 Download product flyer
DIN connectors are used in various applications with different termination methods. The DIN type C connectors are also available in press-fit and other solder technology.
| 
