Nicomatic CMM Series 340 Mixed

nicomatic cmm 340 maleNICOMATIC CMM SERIES 340 MIXED HP/HF

Nicomatic innovation creates even more capability of design with the CMM340 series. By introducing the series 22 Power/ Coax contacts into the familiar 2mm pitch, 3 row CMM320 connector, almost every design choice is now possible

Overview

nicomatic cmm 340 femaleThis new series of micro-connectors offers the widest possible mixed layout choice present on the market today, up to 120 low frequency contacts, 64 high frequency or high power contacts, or virtually any combination of the three contacts. Coaxial high frequency contacts allow high speed signals up to 6GHz and high power (Series 22 up to 10 Amp and Series 30 up to 20 Amp). There are thousands of design capabilities providing a cost effective solution for your needs. The NICOMATIC CMM 340 Mixed Interconnect system is a 2mm pitch connector with 3 rows of LF contacts with HP or HF. High density, mixed layout, minimum of 6 LF contacts with up to 64 special High Frequency or High Power contacts. Proven high reliability under the most extreme environmental conditions.
The Nicomatic CMM range was designed for use in aerospace, instrumentation and control, military and transportation sectors with applications to date including IFES, HUD, flight controls, FADEC units, radar, missiles, optoelectronic sighting systems, space satellites, mobile radios, power supplies, UAVs and engine controls

Key Features

Features include:

  • Board-to-board, board-to-wire and wire-to-wire connections
  • High density ­ saves up to 50% space and weight over conventional connectors or Sub-D
  • Mixed layout, LF, HF and HP in one footprint
  • Min. 6 LF contacts and up to 64 HF or HP contacts (series 22), up to 2500 mating cycles
  • High reliability contact design for harsh environment usage
  • MIL-DTL-55302F and BS-9525-F0033 compliant
  • Resistant to solvents, radiation + oxygen free
  • RoHS and Reach compliant with tin whiskers free, gold plated contacts
  • 260ºC insulator allows infrared, wave or vapour phase
  • Secure latched or jackscrew locking for anti-vibration interconnection

Specifications

Materials
Blue Bullet Insulator: Special PPS recognised for space applications
Blue Bullet High Power/High frequency Contacts:
  Insulator: PTFE (HF)
  Spring Loaded Parts: Be/Cu gold plated
  Other Metal Parts: Copper alloy
  Retaining Clip: Be/Cu Ni plated
 
Electrical
Blue Bullet High Power Contact:
  Intensity: Series 30 = 20 A, Series 22 = 10A
  Contact resistance: max 6mΩ
  Max voltage (sea level): 1000V (RMS)
  Operating voltage (sea level: 180 V AC/500mA
Blue Bullet High Frequency Contact:
  Impedance: 50Ω/ 75Ω
  Insulation resistance: 106 MΩ / 250V (RMS)
  SWR <1.05 + 0.04 F (Ghz)
  Frequency range: Series 30 = 6 Ghz Series 22 = 1.5 Ghz
  Insulation between 2 contacts: -100dB (depending on cable)
   
Environmental
Blue Bullet Operating Temperature: -60ºC to + 260ºC
Blue Bullet Salt spray test: 96 hrs
Blue Bullet Humidity test: 56 days @ 90% humidity
   
Mechanical
Blue Bullet Mechanical operations: Up to 2500 cycles
Blue Bullet Contact insertion force: From 0.60 to 5 N per contact
Blue Bullet Contact withdrawal force: From 0.50 to 2 N per contact
Blue Bullet Secure overlapping: 1.30mm
Blue Bullet Contact replacement in insulator: 50 cycles for HF/HP 30 series, 5 cycles for HF/HP 22 series.

Applications

Nicomatic CMM micro-connectors are designed to meet or exceed the relevant electrical and environmental performances described in MIL-DTL-55302F and BS9525-F0033 standards.

Nicomatic has developed back potting services and shapes as a fast, flexible and reliable solution for harness protection in the CMM Connector Series. These backpotting solutions provide protection from moisture or debris to the contacts while offer strain relief to the wire and cable as an effective alternative to overmolding or backshells.
Nicomatic CMM Series 200 and Series 220 use backpotting shapes made from thermoplastic plastics (Polyethylene or Polypropylene) rated to 100ºC. These shapes work equally well with male and female connectors while the CMM320 and CMM340 use extended walls in the housings allowing them to be filled
and protect terminated contacts.
In2Connect recommend usage of Stycast 2651 MM with Catalyst 9 (8% - 10%) and can also offer harness assembly either pigtailed or complete.

NICOMATIC is certified ISO 9001:2000 and their quality management system is applicable to any type of development, manufacturing, assembly and delivery of systems, components and connections.

Downloads

Back to Listing
 

 
 
 
 

PLEASE FOLLOW OR CONTACT US BY CLICKING THE BUTTONS BELOW

 

Facebook Twitter linkedin Blogger Google Plus YouTube
  Skype  

Skype name

"in2connect"

 

 

   

In2Connect UK Ltd | Unit 5 Home Farm | Petersfield Rd | Ropley | Hampshire | SO24 0EF | UK | Tel:+44(0)1962 773004 | Fax:+44(0)1962 600034

 
Copyright © In2Connect 2017 | Terms & Conditions | Privacy and Cookies Policy | In2Connect UK Ltd.

Powered by Intergage

About Us
Products
D-Sub I/O Connectors
Circular Connectors
Waterproof Connectors
PCB Edge Connector
PCB & Backplane Connectors
DIN 41612 (EN 60603-2) / DIN 41617
McMurdo HE801 (127 Series)
Nicomatic CMM Series 100 Signal
Nicomatic CMM Series 200 Signal
Nicomatic CMM Series 220 Signal
Nicomatic CMM Series 100/200/220/320/340 Mixed
Nicomatic CMM Series 320 Mixed
Nicomatic CMM Series 340 Mixed
Nicomatic DMM
Nicomatic Microflex
Nicomatic Crimpflex Connectors
McMurdo 200/300
McMurdo Red Range
IDC Flat Ribbon Cable Connector
USB 3.0
RJ45 Magnetic Jacks
Connectors for embedded systems
Avionics/Aerospace
Rectangular Connectors
Rack and Panel Connectors
Sensor and Automation Connectors
Cable & Harnessing
ITW Switches
Markets
Product News
Contact Us
Data Sheets
www.intergage.co.uk