Nicomatic CMM Series 100 Signal


The NICOMATIC CMM 100 (Low Frequency) interconnect system is a 2mm pitch connector with 1 row of signal contacts, from 2 to 25 ways, fixing by latch, with proven high reliability under the most extreme environmental conditions.



The NICOMATIC CMM 100 (Low Frequency) interconnect system is a 2mm pitch connector with 1 row of signal contacts, from 2 to 25 ways, fixing by latch, with proven high reliability under the most extreme environmental conditions.

nicomatic cmm 100 maleThe Nicomatic CMM range was designed for use in aerospace, instrumentation and control, military and transportation sectors with applications to date including IFES, HUD, flight controls, FADEC units, radar, missiles, optoelectronic sighting systems, space satellites, mobile radios, power supplies, UAVs and engine controls.

Key Features

Features include:

  • Board to board, board-to-wire and wire-to-wire connections
  • High density ­ saves up to 50% space and weight over conventional connectors or Sub-D
  • Mixed layout, LF, HF and HP in one footprint
  • 2 to 25 low frequency contacts, up to 2500 mating cycles
  • High reliability contact design for harsh environment usage
  • MIL-DTL-55302F and BS-9525-F0033 compliant
  • Resistant to solvents, radiation + oxygen free
  • RoHS and Reach compliant with tin whiskers free, gold plated contacts
  • 260ºC insulator allows infrared, wave or vapour phase
  • Secure latched or jackscrew locking for anti-vibration interconnection
  • Interchangeable and drop-in replacements for ITW McMurdo Micronector 200 single row and Harwin Datamate L-Tek Series. These ranges are comparable in fit, form and function.


Blue Bullet Insulator: Special PPS (Polyphenylene Sulfide Fiberglass filled thermoplastic) UL94-V0
  Radiation resistant, no humidity absorption, oxygen free
  Note: PPS characteristics are recognised for space applications
Blue Bullet P.C. or Crimp Low Frequency Contacts:


Tail: copper alloy/Ni + Au flash 0.1µ    Contact area: copper alloy/Ni + Au > 1µ

Crimp Male body: copper alloy/Ni + Au > 1µ



Body: copper alloy/Ni + Au 0.2µ         Socket: beryllium copper/Ni + Au flash > 1.25µ

Blue Bullet Fixing Hardware:
  Jackscrew: stainless steel
  Latch: beryllium copper/plated nickel (CMM100/200 series only)
Blue Bullet All contacts: 3A Max @ 25ºC / 2.2 A Max @ 85ºC
Blue Bullet Working voltage (sea level): tested at 800 V DC
Blue Bullet Proof voltage: tested at 1,200 V DC
Blue Bullet Contact resistance: (initially) max.10 mΩ
Blue Bullet Insulation resistance: 1 000 MΩ min
Blue Bullet Operating Temperature: -60ºC to + 260ºC Reflow solder process compatible
Blue Bullet Vibration Severity: 0.75mm, 10g RMS 6 hours long random with superimposed sinusoid. No intermittencies when using an HSLI detector with a trip threshold of 2ns. MIL DTL 55302F Test Condition III [147.1 m/s2 (15gn) peak].
Blue Bullet Shock severity: 100g for 6 ms
Blue Bullet Solvent resistance: HcFc 141 bMGX (ATOCHEM) solvent
Blue Bullet  Mechanical operations: Up to 2500 cycles
Blue Bullet

Contact insertion & withdrawal force: 2N Max/0.2N min. per contact

Blue Bullet  Contact retention in insulator: 10 N Min
Blue Bullet  Contact replacement in insulator: 3 cycles (crimp contacts only)


Nicomatic CMM micro-connectors are designed to meet or exceed the relevant electrical and environmental performances described in MIL-DTL-55302F and BS9525-F0033 standards.

Nicomatic has developed back potting services and shapes as a fast, flexible and reliable solution for harness protection in the CMM Connector Series. These backpotting solutions provide protection from moisture or debris to the contacts while offer strain relief to the wire and cable as an effective alternative to overmolding or backshells.
Nicomatic CMM Series 200 and Series 220 use backpotting shapes made from thermoplastic plastics (Polyethylene or Polypropylene) rated to 100ºC. These shapes work equally well with male and female connectors while the CMM320 and CMM340 use extended walls in the housings allowing them to be filled
and protect terminated contacts.
In2Connect recommend usage of Stycast 2651 MM with Catalyst 9 (8% - 10%) and can also offer harness assembly either pigtailed or complete.

NICOMATIC is certified ISO 9001:2000 and their quality management system is applicable to any type of development, manufacturing, assembly and delivery of systems, components and connections.


Back to ListingPreviousNext



Facebook Twitter linkedin Blogger Google Plus YouTube

Skype name





In2Connect UK Ltd | Unit 5 Home Farm | Petersfield Rd | Ropley | Hampshire | SO24 0EF | UK | Tel:+44(0)1962 773004 | Fax:+44(0)1962 600034

Copyright © In2Connect 2017 | Terms & Conditions | Privacy and Cookies Policy | In2Connect UK Ltd.

Powered by Intergage

About Us
D-Sub I/O Connectors
Circular Connectors
Waterproof Connectors
PCB Edge Connector
PCB & Backplane Connectors
DIN 41612 (EN 60603-2) / DIN 41617
McMurdo HE801 (127 Series)
Nicomatic CMM Series 100 Signal
Nicomatic CMM Series 200 Signal
Nicomatic CMM Series 220 Signal
Nicomatic CMM Series 100/200/220/320/340 Mixed
Nicomatic CMM Series 320 Mixed
Nicomatic CMM Series 340 Mixed
Nicomatic DMM
Nicomatic Microflex
Nicomatic Crimpflex Connectors
McMurdo 200/300
McMurdo Red Range
IDC Flat Ribbon Cable Connector
USB 3.0
RJ45 Magnetic Jacks
Connectors for embedded systems
Rectangular Connectors
Rack and Panel Connectors
Sensor and Automation Connectors
Cable & Harnessing
ITW Switches
Product News
Contact Us
Data Sheets