MIL-C 26482 Series I, II

Materials

	Shell Normal - Aluminium alloy, plated olive drab chromate Hermetic - Steel, stainless steel & passivate Sizes - 08, 10, 12, 14, 16, 18, 20, 22, 24
	Insulator - Neoprene/Polychloroprene rubber
	Contacts - Gold or gold/tin lead over copper alloy or nickel Sizes - 08, 10, 12, 14, 16, 20, 24 Solder / PC tail ~ 2 to 61 Male or Female

Electrical

	Current Size 20 : 7.5A Size 16 : 13A Size 12 : 23A
	Voltage 500V rms (size 20 contacts) 300V rms (size 16 contacts
	Contact Resistance Normal - 4 m (size 20) 3 m (size 16) Hermetic - 30 m (size 20) 14 m (size 16)
	Insulation Resistance - > 5,000 m under 500V DC
	Shielding 70 dB to 5 MHz 40 dB to 100MHz

Mechanical

	Contact to insulator holding force 20 AWG > 68 N 16 AWG > 113 N
	Mechanical operations - 500 Min
	Vibration - to NFC 20-616.

Environmental

	Working temperature : -55 to +125 degrees C.
	Resistance to salt spray - 48 hours at environmental temp
	Damp heat - > 21 days
	Sealing Crimp = < 8cm/hr at 1 bar diff. pressure Solder = < 16cm/hr at 2 bar diff. pressure
	Hermetic - < 2.8mm/hr at 1 bar diff. Pressure

Types

Series 1 solder
MS 3110 - Wall mount receptacle
MS 3111 - In-line receptacle
MS 3112 - Box mount receptacle
MS 3113H - Hermetic sealed solder receptacle
MS 3114 - Jam nut receptacle
MS 3116 - Straight plug
MS 3119E - Through bulkhead receptacle
MS 3120 - Wall mount receptacle
MS 3121 - In-line receptacle
MS 3122E - Box mount receptacle
MS 3124 - Jam nut receptacle
MS 3126 - Straight plug
MS 3127E - Large flange box mount receptacle
MS 3128 - Large flange wall mount receptacle

Series 2 crimp
MS 3440H - Hermetic sealed box mount receptacle
MS 3442H - Wide flange, hermetic sealed box mount receptacle
MS 3443H - Hermetic sealed solder receptacle
MS 3449H - Hermetic sealed jam nut receptacle
MS 3470 - Wall mount receptacle
MS 3471 - In-line receptacle
MS 3472 - Wide flange wall mount receptacle
MS 3473N - Hermetic sealed solder receptacle
with crimp retention
MS 3474 - Jam nut receptacle
MS 3475 - Straight plug with RFI grounding
MS 3477N - Hermetic sealed box mount receptacle
with crimp retention
MS 3479N - Hermetic sealed jam nut receptacle
with crimp termination

MIL-C 26482 Connector

MIL-DTL-26482 Medium Density multi-pin, bayonet locking, miniature military circular connector ~ rugged construction with minimum weight.

This specification covers the general requirements for two series of environment resisting, bayonet quick disconnect, miniature, circular electrical connectors (and accessories). Each series contains hermetic receptacles. The two series of connectors are intermateable when using power contacts and are not intermateable when using shielded contacts. When intermated, the minimum performance requirement for Series I connectors will be met.

Historically much used in commercial, military and aerospace environments as well as robotics, communications, medical equipment, automation and sensors. The versatility of these connectors is proven by the fulfilment of requirements ranging from general purpose to space environmental.

Series I Connector, bayonet coupling, solder or front release crimp removable (125ºC). Hermetic sockets are also available.
Series II Connector, bayonet coupling, rear release crimp removable contacts (200ºC), (classes H, N, and W, 175°C). Series 2, hermetic connectors are available with non-removable solder type contacts.

Series II connectors are intermateable and interchangeable with both solder and front-release crimp Series 1. They are also identical to the inactivated MIL-DTL-83723 Series I connectors.

Download MIL-C 26482 Data Sheet

SJ 26482

Environmentally sealed, the shell seal is achieved when the plug shell pushes against the sealing ring in the receptacle as the connectors are mated. A peripheral seal around the edge of the pin insulator is designed so that mating the connector puts tension on the seal and greatly reduces compression set. An interfacial seal is achieved by the insulator faces meeting when the plug and receptacle are mated. A wire seal is accomplished by a multiple ripple design.

Features
	Conform to MIL-C-26482
	BS9522 F0017 (solder) with key/keyway orientation (optional rotational polarisation).
	Quick disconnect bayonet coupling for positive mating
	9 shell sizes, 8 through 24
	Various rugged shell styles
	Solder or crimp contact versions
	Up to 61 contacts (20 AWG).
	Environmental and hermetic versions available.
	Amphenol 62GB range is a good example of this connector family, other part numbers include 62GB / 602GB / ITT PT / ITT PTSE / ITT KPT / ITT KPTSE / AB ABO5 Backshells must be ordered separately for these connectors. There is a wide variety backshell types available in the Mil-C-M85049 range. These include simple strain reliefs, heat shrink boot adaptors, gland seals and EMI/RFI backshells.
FURTHER INFORMATION
	Need help choosing the right MIL-C connector for your application?
	Require detailed specifications, prices and availability?

Just complete our Please Call Me! contact form, and we will be in contact as soon as possible with an answer.